Brainboxes PX-246 Spécifications télécharger pdf (Page 14)

Specifications

Part No. 057-120 8660 OPERATING MANUAL ISSUE 1 07/05/2010 ADM

3.8.1 COMMUNICATION PORT USAGE

USB, RS232 and RS485 ports are all fitted as standard to the controller for simultaneous or individual use.

3.8.1.1 USB CONNECTION

The USB port is provided to give a simple means of connection between a PC and the DSE8660 series controller.

Using the DSE Configuration Suite Software, the operator is then able to control the module, starting or stopping the

generator(s), selecting operating modes, etc.

Additionally, the various operating parameters (such as output volts, oil pressure, etc.) of the remote generator(s)

are available to be viewed or changed.

To connect a DSE8600 series module to a PC by USB, the following items are required:

• DSE8600 series module

• DSE 8600 series configuration software

(Supplied on configuration suite software CD or available from

www.deepseaplc.com).

• USB cable Type A to Type B.

(This is the same cable as often used between a PC and a USB printer)

DSE can supply this cable if required :

PC Configuration interface lead (USB type A – type B) DSE Part No 016-125

NOTE: - The DC supply must be connected to the module for configuration by PC.

NOTE: - Refer to DSE8600 series Configuration Suite Manual (DSE part 057-119) for further details on

configuring, monitoring and control.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 73 74

Pas de commentaire

Brainboxes PX-246 Spécifications Page 14